6082-T651 Feuille d'aluminium

Specification

Name: 6000 series Aluminum Sheet

Alloy: 6061, 6082, 6063 etc.

Temper: O, H112, T4, T6, T651 etc.

Thickness: 6-200mm

Width: Up to 1500mm

Surface treatment: mill finished, Print marks

Feature

Machinability: In the harder T 4 and T6 tempers it is good. It is notably less easy to machine in the annealed temper.

Forming: Easily cold worked and formed in the annealed condition. Stamping, bending, spinning, deep drawing are all readily accomplished using standard methods.

Welding: It has very good welding characteristics and may be welded by all of the common welding techniques.

Heat Treatment: Solution heat treat at 990 F for adequate time to allow for thorough heating and then water quench. Precipitation hardening is done at 320 F for 18 hours and air cool, followed by 350 F for 8 hours and air cooling.

Forging: It is capable of being hot forged at temperatures in the range of 900 F to 750 F.

Hot Working: Hot working may be done in the temperature range of 700 F to 500 F.

Cold Working: Cold working in the O temper condition is readily performed. The alloy is notably less easy to cold form in the T 4 and T 6 tempers.

Annealing: Annealing should be done at 775 F for 2 to 3 hours followed by controlled cooling at 50 f per hour down to 500 F, then air cool.

Aging: The aging precipitation heat treatment is done at 350 F for 8 hours followed by air cooling. This produces the T6 temper.

Application

Commonly used in the manufacture of heavy-duty structures requiring good corrosion resistance, truck and marine components, railroad cars, furniture, tank fittings, general structural and high pressure applications, wire products, pipelines, various toolings etc.

Alloy

Chemical Component %≤

Si

Fe

Cu

Mn

Mg

Cr

Ni

Zn

Ti

others

Al

single

total

6061

0.4- 0.8

0.7

0.15-0.4

0.15

0.8- 1.2

0.04-0.35

\

0.25

0.15

0.05

0.15

remainder

6082

0.7- 1.3

0.5

0.1

0.4- 1.0

0.6- 1.2

0.25

\

0.2

0.1

0.05

0.15

remainder

6063

0.2-

0.6

0.35

0.1

0.1

0.45-0.9

0.1

\

0.1

0.1

0.05

0.15

remainder

Stirp:Wooden box or carton box; max 3 tons/wooden box;50kgs/carton box.